Alumitrex Right Hand Storefront Glass Door Replacement, 35-3/4 in. x 83-3/16 in. x 1-3/4 in., 1/4 in. Tempered Clear Glass, Offset Pivots, Concealed Track Arm, Deadbolt, Outside Pull Handle, Inside Push Bar, Dark Bronze Anodized Finish

Introducing replacement Alumitrex storefront glass doors from Door Closers USA, designed for seamless integration with your existing storefront system. Each door package includes top and bottom offset pivots, a push/pull handle set, and a lock cylinder, all pre-prepped to match your current door setup. The offset pivots must be field installed to ensure proper alignment, providing a precise fit. This thoughtful design allows the new door to be installed on the existing door frame, saving you both time and money. Trust Door Closers USA for efficient and high-quality replacement solutions.

Includes

• 1 Each 35-3/4 in. x 83-3/16 in. x 1-3/4 Narrow Stile Storefront Aluminum Door, Dark Bronze Anodized Finish with 1/4 in. Tempered Clear Glass
• 1 Each Offset Slide Block Track Arm Assembly
• Top and Bottom Offset Pivots
• Deadbolt With Lock Cylinders On Exterior and Interior Side (Specify Lock Cylinder D Height; Measured From Bottom Of Door To Center Line Of Lock Cylinder)
• 10 in. Center To Center 1 in. Diameter Pull Handle and 1 in. Diameter Push Bar Set (Specify A, B, and C Measurements; Measured From Bottom of Door To Center Line Of Handle)

Dimensions

• Exact Door Size: 35-3/4 in. x 83-3/16 in. x 1-3/4 in.
• Used On Existing Storefront Frames With An Inside Dimension Of 36 in. Wide x 84 in.Tall